White containment enclosure with an air scrubber and asbestos warning signs

Mould and asbestos containment that stays clean

Washable, reusable panel enclosures for abatement, remediation and restoration crews. Up in hours, solid all job, and gone without a trace when you're done.

Up in hours, not days

Panels lock together on site. No framing, taping, mudding or painting, and no waiting for anything to dry.

Washes down clean

Smooth PVC faces wipe or wash down between phases and at the end of the job. Built for wet, high-moisture areas.

Holds the boundary

Sealed joints and fitted doors help your crew keep negative air and keep dust and spores on the work side.

Used again and again

Every square foot of panel keeps about 1.6 lb of single-use material out of landfill (the manufacturer's figure), job after job. The panels are recyclable PVC.

Why crews switch from poly and drywall

Every containment job ends with a clean-up. The material you pick at the start decides how hard that clean-up is.

How poly sheeting, drywall hoarding and NexaBarrier panels compare
FeaturePoly sheetingDrywall hoardingNexaBarrier panels
Set-up timeFastDays, with finishingHours
Washes downNoNoYes
Stands up to waterTears and sagsSoaks up water and feeds mouldBuilt for wet areas
ReusableNoNoYes
Looks finished to the publicNoOnce paintedFrom day one
Doors and windowsZippersFramed inBuilt into the system
Fire performanceNeeds a flame-retardant gradeNon-combustible coreTested to ULC S102.2 flame and smoke spread
Dust during installLowCutting and sanding dustNo cutting on site
CostLowest up front, redone every phaseStuds, board, paint and disposalComparable to drywall, and reused
Waste at the endBags of plasticA bin of drywallPanels go back on the truck

The details crews ask about

Fire tested

Panels tested by the manufacturer to ULC S102.2 for flame and smoke spread, rated Class A1. Results available for your project file.

No dust going up

Nothing is cut or sanded on site, so installing the wall doesn't add to the problem you're containing.

Priced like drywall

Comparable to studs, board, paint and disposal, without the finishing days, and the same panels move with each phase.

One complete system

Panels, channels, corners, bracing, doors, handles and locks all come from one kit, delivered, installed and removed by us.

Your plan, our walls

Send the work-zone drawings and your consultant's containment requirements. We lay out the enclosure, entries and decon rooms to match, install it, and move it as areas are cleared.

  • Work-area enclosures of any size
  • Entry, decon and staging rooms
  • Ports for air-unit ducting
  • Lockable doors and warning signage
  • Phased moves as zones clear

We supply and install the containment walls. Your licensed abatement contractor runs the abatement, air handling, monitoring and clearance.

Close-up of a worker in a respirator wiping a panel

Who uses it

  • Asbestos abatement contractors
  • Mould remediation companies
  • Restoration and insurance repair
  • Environmental consultants
  • Hospital and school facility teams
  • Property managers

Common questions

Do you do the abatement work?

No. We supply and install the containment walls. Your licensed abatement or remediation contractor runs the abatement, air handling, monitoring and clearance. We build the enclosure to their plan.

How fast can you install?

A typical enclosure goes up in a single shift. Larger or phased walls are scheduled with you, including evenings and weekends.

Can the panels get wet?

Yes. The PVC panels are made for high-moisture areas and can be wiped or washed down.

Will it hold negative air?

With sealed joints and fitted doors, the enclosure supports the negative air your contractor sets up with their air units. Performance is set and checked by your contractor or consultant.

Is the system fire tested?

Yes. The manufacturer has tested the panels to ULC S102.2 for flame and smoke spread and rates them Class A1. Test results are available on request for your project file.

How does the cost compare?

On most jobs the cost is comparable to steel studs, drywall, paint and disposal, and you save the days of finishing. Phased jobs save more because the same panels move with the work.

Price your next containment job

Send the drawings or a description and the containment criteria if you have them. We'll come back with a layout and a price within one business day.

We reply within one business day. See our privacy notice.

Get a quote